Danh Mục Sản Phẩm
Giải pháp lọc khí toàn diện cho mọi cấp độ sạch
V-Roll (Pre-Filter Media Roll)
Roll-type primary air filter media made of water-resistant synthetic fiber.
V-F (Ceiling Filter)
Ceiling filter with tackifier for spray booths, efficiency M5-M6.
V-R28 (Paint Stop / Floor Filter)
Glass fiber paint mist arrestor for spray booth floors, arrestance 90-95%.
V-RA (Metal Mesh Filter)
Permanent washable Aluminum/Stainless Steel mesh filter, high temperature resistance.
V-R (Washable Panel Filter)
Washable primary panel filter with metal frame.
V-RW (Washable Pleated Panel Filter)
Washable primary filter with pleated media (Wave form) for higher surface area.
V-RZ (Washable Deep Pleat Filter)
Washable primary filter with deep pleats (96mm) for higher airflow and durability.
V-DI (Disposable Cardboard Filter)
V-DI is a disposable pre-filter using synthetic media, a moisture-resistant cardboard frame and galvanized support grid. It captures coarse dust and protects coils and downstream filters in AHU and HVAC systems.
V-HT (High Temp Primary Filter)
High temperature resistant (250°C) primary filter for drying ovens.
V-PAK M5 (Bag Filter)
M5 efficiency bag filter, high dust holding capacity, durable construction.
V-PAK M6 (Bag Filter)
M6 efficiency bag filter, secondary filter to protect fine filters.
V-PAK F7 (Bag Filter)
V-PAK F7 is a synthetic-media bag filter for fine filtration in AHU and HVAC systems. Its large media area captures fine dust, reduces the load on HEPA filters and supports longer final-filter service life.
V-PAK F8 (Bag Filter)
V-PAK F8 is an ePM1 70% fine bag filter for AHU and HVAC systems requiring stronger fine-particle control. Its multi-pocket design provides a large filtration area and protects downstream HEPA filters.
V-PAK F9 (Bag Filter)
V-PAK F9 is an ePM1 80% bag filter for high-efficiency fine filtration upstream of HEPA filters. Multiple pocket counts, depths and frame materials support different AHU configurations.
V-DURA (Plastic V-Bank Filter)
Durable ABS frame V-Bank filter, large filtration area, high airflow capacity.
V-DURA CARBON (Chemical Filter)
V-DURA Carbon is a V-bank gas-phase filter using activated or impregnated carbon media. Media selection depends on the odor or contaminant, concentration, airflow and required contact time.
VMI (Aluminum Separator Box Filter)
Rigid box filter with aluminum separators, high stability construction.
VMI-HT (High Temp 250°C Box Filter)
High temperature (250°C) fine filter for drying ovens, aluminum separators.
VM II (Mini-pleat Compact Filter)
Compact fine filter (100mm/292mm), Mini-pleat technology for space saving.
Ultracel I - SC (Standard Capacity HEPA)
Ultracel I - SC is an aluminum-separator HEPA/ULPA filter for standard airflow, terminal filtration and controlled clean areas. H13, H14 and U15 classes are selected according to system efficiency, airflow and pressure-drop requirements.
Ultracel I - HC (High Capacity HEPA)
Ultracel I-HC is an aluminum-separator HEPA filter for systems requiring higher airflow within limited installation space. H13/H14 configurations are available in multiple dimensions and depths for in-duct or terminal filtration.
Ultracel I - HT (High Temp HEPA)
Ultracel I-HT is an H13/H14 high-temperature HEPA filter for ovens, depyrogenation tunnels and thermal processes. The stainless-steel frame and specialist sealing system are selected according to operating temperature and heating cycle.
Ultracel II - SC (Standard Capacity Mini-pleat)
Ultracel II-SC is a 69 mm mini-pleat HEPA/ULPA filter for FFU and cleanroom ceiling systems. Its separator-free construction increases media area, reduces weight and supports H13, H14 or U15 classes.
Ultracel II - MC (Medium Capacity Mini-pleat)
Slim 69mm Mini-pleat HEPA, Medium airflow capacity (0.75m/s).
Ultracel II - HC (High Capacity Mini-pleat)
110mm Mini-pleat HEPA, High airflow capacity (1.25m/s).
Ultracel II - GEL (Gel Seal HEPA)
Ultracel II-GEL uses a urethane gel channel to create a continuous seal between the filter and housing. Its H13/H14/U15 mini-pleat design suits areas requiring controlled sealing and serviceability.
Ultracel II - GEL TYPE 2 (Gel Seal with Header)
Gel Seal HEPA with Header frame design for easy installation.
Ultracel V - ABS (Plastic V-Bank HEPA)
High capacity V-Bank HEPA, ABS plastic frame, airflow up to 4000 m3/h.
Ultracel V - GI (Galvanized V-Bank HEPA)
V-Bank HEPA filter with Galvanized Iron frame, robust and high pressure resistant.
Fan Filter Unit (FFU)
The FFU combines a fan and HEPA/ULPA filter for standalone or modular cleanroom ceiling installation. It provides stable clean airflow for electronics, pharmaceutical and other controlled production areas.
Blower Filter Unit (BFU)
Air unit with centrifugal fan, high static pressure, low noise.
Static Pass Box
Standard transfer hatch with interlock system to prevent cross-contamination.
Dynamic Pass Box (Self-Cleaning)
Pass box with built-in fan & HEPA filter for self-cleaning materials.
Air Shower
High velocity air jets to remove particulate matter from personnel or cargo.
HEPA Terminal Box
Ceiling mounted HEPA filter housing with integrated air diffuser.
In-line Duct Filter Box
In-line filter housing for Pre & Fine filters, installed in supply/return ducts.
LAF (Laminar Air Flow Unit)
Local laminar flow unit (Class A/ISO 5), mobile or suspended type.
OT Laminar Flow Ceiling
Laminar flow ceiling system specifically designed for Operating Theatres.
BIBO (Bag-In Bag-Out Housing)
Safe change filter housing, prevents operator contact with hazardous contaminants.
